Products Introduce of POWER-SAVE-PIONEER?

Technology come form U.S

 

Everyone That Has an Electric Bill Should Have a POWER-SAVE-PIONEER? !

Imagine a small gray box that fits neatly next to your breaker panel, saves you money year after year and protects the entire home. Sound too good to be true?

The POWER-SAVE-PIONEER ? was designed with the homeowner in mind, providing lower energy bills, increased motor and appliance life, as well as surge and lightning protection for all of the equipment inside of your house.

Residential customers throughout the United States and Canada see a realized savings of 8% - 10% minimum and as much as 25% on their electrical usage (and thus power bills).

 1. POWER-SAVE-PIONEER? Model : JVision200

STOP PAYING FOR WASTED ELECTRICITY; INSTALL THE POWER-SAVE-PIONEER? &

SAVE UP TO 25% PER MONTH ON YOUR ELECTRIC BILL!

---> Reduces Electrical Bills up to 25% or More Every Month!

---> Pays for Itself in Less Than One Year!

---> 60-Day Money Back Guarantee!

---> Increases Motor and Appliance Life!

---> UL Tested and Listed!

---> Over 14,000 Customers are Saving Money Right Now!

---> Eliminates Power Surges!

---> Reduces 'Noise' in the Electrical System!

 

The Problem: Your Home Wastes Power

All the the world the homes all have the same problem. They inefficiently handle inductive load. Inductive load is anything in the home that runs by motor including refrigerators, freezers, air conditioners, heat pumps, washers, dryers, fans, blower motors, pool pumps, dish washers, vacuum cleaners and hair dryers. You get the picture, right?

All motors require a certain amount of reactive power (non-working power) from the utility to create the Electro-Magnetic-Field (EMF) around the motor to make it work. The problem is that your local utility delivers that reactive power to your home without knowing how much you really need. Your inductive load (motors) then uses what it needs and sends the rest back to your electric panel where it is "lost" - dispersed in heat never to be seen again. This loss is called I2R loss or "line loss". The problem with this equation is that you¡ve paid for the lost electricity, because it's traveled thru your meter and been measured.

The Solution: The Power-Save-Pioneer? Model:S200

The Power-Save Pioneer unit stores the reactive power (non-working power) that would be otherwise lost. This allows your inductive motor load to push in and pull from the Power Save 1200 using the stored power, instead of asking for more from the utility. This process decreases your demand from the utility thereby decreasing your Kwh usage and lowering your bill each month! Suitable For Use : Residential & small business ( office, shop, bank ,etc)

Benefits:

  • Reduces electricity required by existing inductive loads
  • Enhances capacity of existing electrical system
  • Eliminates danger of harmful power surges on appliances and sensitive electronic equipment
  • Reduces harmful effects caused by electrical noise in the electrical system

Features:

  • Electrical Noise Reduction
  • Power Factor Optimization
  • Voltage Regulation
    *Cleans Resonance in the line

Specifications:

  • 110 /220 volt single phase model S200
  • 380/450 volt Three phase model T200
  • 380/450 volt Three Phase model T400
  • Utilizes Self-Healing Low Loss Capacitors
  • 25 Year Design Life
  • Surge Suppression – 2000 Joules
  • Typical Protection For : Electrical Storms, Lightning Activity and Power Utility Spikes
  • Load Rating – 20A (this means it discharges up to 20 amps at a time)single phase

200 A three phase T200 & 400 A three phase T400

  • Six-Way Electrical Protection
  • EMI / RFI Noise Reduction 0–40dB
  • Weight w/ packaging is 10.1 lbs.
  • Units is NEMA 3 rated 7” X 7” X 8” enclosures
  • Provides Automatic Protection
  • Passive Device (Does not interfere with operation of equipment)
  • Protects from Lightning Strikes
  • Tested and Passed ANSI/IEEE Standard C62.1 for Secondary Surge Arrester
  • Exceeds Test Requirements and is in Compliance with CSA Standard C22.2 #No. 0-M1982
  • Removes Damaging Voltage Spikes and Surges
  • Reduces Harmonic Effect. (Dissipates Heat)
  • EMI and RFI Reduction
  • All Solid State BI-Directional Components
  • Reacts in Less than One Nanosecond with 6 inch Leads or Less
  • Comes with 7 year Product Warranty
  • Cost Effective Protection

 

 

Download fully functional evaluation here.

 

Existing users download latest update here.